多西紫杉醇修饰的人工晶体与眼组织相容性分析

目的：探讨经多西紫杉醇修饰的人工晶体对眼组织相容性的影响。方法：按照随机数字表法将32 只日本大耳兔分为两组： 实验组通过手术植入表面经多西紫杉醇修饰处理后的疏水性人工晶体，对照组植入疏水性人工晶体。比较两组人工晶体亲水角、 术后24 小时光耀斑块计数以及人工晶体周围组织炎症浸润数。结果：实验组的亲水角小于对照组，差异有统计学意义（P<0.05）。 实验组光耀斑块计数低于对照组，差异有统计学意义（P<0.05）。实验组家兔人工晶体周围组织炎症浸润计数低于对照组，差异有 统计学意义（P<0.05）。结论：人工晶体表面经多西紫杉醇修饰后，其亲水性、与眼组织的组织相容性增加，且可缓解光耀斑炎症感 染和降低并发症的发生，有重要的临床参考价值。     

In Vitro Cultivation of Borrelia duttonii on Cultures of SflEp Cells

Borrelia duttonii strain 406 K, a causative agent of relapsing fever, could not be cultivated in vitro in currently available media for borreliae. We have developed an in vitro cultivation system by using SflEp cell cultures. The average increases of the number of borreliae, when inoculated with 1.0 × 10⁵ organisms per ml from infected mice, were 23-fold and 150-fold in the primary culture and the 3rd subculture, respectively. Even a single borrelia could propagate in this cultivation system. This system will be useful for immunological and physiological studies on uncultivable Borrelia strains.     

Can transposable element copy number distribution parameters be estimated from natural populations of Drosophila melanogaster?

The copy frequency distribution of a transposable element family in a Drosophila melanogaster natural population is generally characterised by the values of the Charlesworths' model parameters α and β (Charlesworth & Charlesworth, 1983). The estimation of these parameters is made using the observed distribution of the occupied sites in a population sample. Several results have been interpreted as due either to the influence of stochastic factors or to deterministic factors (transposition, excision, selection…). The accuracy of this method was tested by estimations performed on samples from simulated populations. The results show that with the sample size usually used for natural population studies, the confidence intervals are too large to reasonably deduce either the element copy number distribution or the values of transposition and excision rate and selective coefficients.     

Immunomodulation of tahneeq method in IL-12 and CD8+ T-Lymphocyte,an in-vivo study in neonatal rats

Stimulation of the neonatal immune system is quite important for the proliferation and differentiation of antigen-presenting cells (APCs) and T cells. Tahneeq is a traditional method to manually rub the palatal mucosa of newborn babies with premasticated Ajwa palm dates. The present study was to investigate the tahneeq effects on IL-12 expression of dendritic cells (DCs) and blood T lymphocytes expressing CD8⁺ in neonatal Wistar rats. The number of 90 healthy neonatal Wistar rats have randomly divided into three groups: control group received breastmilk only, treatment group (T1) receiving breast milk + mild-scratched intensity of tahneeq, and T2 group received breastmilk + strong-scratched intensity of tahneeq on the palatal and gingival mucosa immediately after birth.  Seven neonatal Wistar rats in all groups were then sacrificed in three hours after birth and days 1, 5, 7, 13, and 30 treatment. IL-12 expression in the palatal and gingival mucosa was determined using immunohistochemical staining, and blood CD8⁺ T-lymphocytes were quantified using a flow cytometer. One way ANOVA was used to analyze the percentage of IL-12 and CD8⁺ T-lymphocytes among neonatal Wistar rat groups.  The T1 and T2 newborn rat groups had significantly higher IL-12 expression than the control group (p<0.001). The increased IL-12 expression in T2 groups significantly increased (p<0.001) compared to the IL-12 expression in the T1 and control groups. The percentage of  CD8⁺ T lymphocytes in all neonatal rat groups increased on three hours after birth and day 30 treatment but remained constant on days 5 and 7 treatment and decreased on day 13 treatment. At 5, 13, and 30^th days treatment,  the percentage of CD8⁺ T lymphocytes in T1 and T2 neonatal rat groups was significantly higher (p<0.05) than that in the control group. In conclusion, the impact on systemic CD8⁺ T cells did not influence by the depth of the scratch. Both mild and strong tahneeq increased the systemic CD8⁺ T-lymphocytes in neonatal Wistar rats. The roles of anti-inflammatory cytokines and Treg cells should be further investigated to unravel those different results for the development of mucosal immunity in neonates.     

Study of accumulation behaviour of tungsten based composite using electron probe micro analyser for the application in bone tissue engineering

In this research, a proto-type study we have conducted, where we have synthesized tungsten based composite materials which are tungsten along with combined oxides of other elements like calcium, scandium, barium, and aluminium in the form of powder with bones powder of mice devised by high energy ball mill and later on fabricating high dense pellets by sintering by spark plasma. The particle sizes of the composite materials are found to be 1–2 µm, as evidenced by the electron microscope, suggesting synthesized materials are of micron size. The quantitative and qualitative analysis of sintered pellets are well confirmed by electron probe micro analyzer (EPMA) and energy dispersive X-ray spectrometer (EDS) which illustrate the greater percentage of tungsten presents in the profound scan areas with other elements of the composite. The absence of pores across the 3D geometry suggesting dense sample, which is quite revealed by the X-ray tomography inspection. The prepared sintered pellets from the tungsten based composites are found to be ≈ 99.5% density with the observation of tungsten to be accumulated uniformly across the scan regions along with focussed hot spots as implied by EPMA. This study paves the way, to examine how the tungsten accumulation and the distribution with the other elements for future understanding in bone tissue engineering application and the in vivo specification of tungsten.     

Partitioning of knee joint internal forces in gait is dictated by the knee adduction angle and not by the knee adduction moment

Medial knee osteoarthritis is a debilitating disease. Surgical and conservative interventions are performed to manage its progression via reduction of load on the medial compartment or equivalently its surrogate measure, the external adduction moment. However, some studies have questioned a correlation between the medial load and adduction moment. Using a musculoskeletal model of the lower extremity driven by kinematics–kinetics of asymptomatic subjects at gait midstance, we aim here to quantify the relative effects of changes in the knee adduction angle versus changes in the adduction moment on the joint response and medial/lateral load partitioning. The reference adduction rotation of 1.6° is altered by ±1.5° to 3.1° and 0.1° or the knee reference adduction moment of 17 N m is varied by ±50% to 25.5 N m and 8.5 N m. Quadriceps, hamstrings and tibiofemoral contact forces substantially increased as adduction angle dropped and diminished as it increased. The medial/lateral ratio of contact forces slightly altered by changes in the adduction moment but a larger adduction rotation hugely increased this ratio from 8.8 to a 90 while in contrast a smaller adduction rotation yielded a more uniform distribution. If the aim in an intervention is to diminish the medial contact force and medial/lateral load ratio, a drop of 1.5° in adduction angle is much more effective (causing respectively 12% and 80% decreases) than a reduction of 50% in the adduction moment (causing respectively 4% and 13% decreases). Substantial role of changes in adduction angle is due to the associated alterations in joint nonlinear passive resistance. These findings explain the poor correlation between knee adduction moment and tibiofemoral compartment loading during gait suggesting that the internal load partitioning is dictated by the joint adduction angle.     

Temporal changes of mechanical signals and extracellular composition in human intervertebral disc during degenerative progression

In this study, a three-dimensional finite element model was used to investigate the changes in tissue composition and mechanical signals within human lumbar intervertebral disc during the degenerative progression. This model was developed based on the cell-activity coupled mechano-electrochemical mixture theory. The disc degeneration was simulated by lowering nutrition levels at disc boundaries, and the temporal and spatial distributions of the fixed charge density, water content, fluid pressure, Von Mises stress, and disc deformation were analyzed. Results showed that fixed charge density, fluid pressure, and water content decreased significantly in the nucleus pulposus (NP) and the inner to middle annulus fibrosus (AF) regions of the degenerative disc. It was found that, with degenerative progression, the Von Mises stress (relative to that at healthy state) increased within the disc, with a larger increase in the outer AF region. Both the disc volume and height decreased with the degenerative progression. The predicted results of fluid pressure change in the NP were consistent with experimental findings in the literature. The knowledge of the variations of temporal and spatial distributions of composition and mechanical signals within the human IVDs provide a better understanding of the progression of disc degeneration.     

Updated Lagrangian finite element formulations of various biological soft tissue non-linear material models: a comprehensive procedure and review

Simplified material models are commonly used in computational simulation of biological soft tissue as an approximation of the complicated material response and to minimize computational resources. However, the simulation of complex loadings, such as long-duration tissue swelling, necessitates complex models that are not easy to formulate. This paper strives to offer the updated Lagrangian formulation comprehensive procedure of various non-linear material models for the application of finite element analysis of biological soft tissues including a definition of the Cauchy stress and the spatial tangential stiffness. The relationships between water content, osmotic pressure, ionic concentration and the pore pressure stress of the tissue are discussed with the merits of these models and their applications.